10NMB500

Page 1 of 3

NEW 10” Neodymium Midbass, 3” voice coil, 500 W, 96.5 dB

KEY FEATURES:

96.5 db 1W / 1m average sensitivity
77 mm aluminium, high temperature voice coil
1000 W program power
Vented neodymium magnet assembly with massive heatsink
Double aluminium demodulating rings for lower distortion and improved heat dissipation
Epoxy anti-corrosion coating of top and back plates of the magnet structure
Water protected cone (front)

PART NUMBER: 11110N0108

Application : Power midbass speaker

The 10NMB500 neodymium loudspeaker is combining good linearity and efficiency with high power handling capabilities, with use of 77 mm aluminium voice coil. It features curvilinear paper cone with water protection (front), aluminium die cast frame with vented neodymium magnet structure. The double aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response. The massive heatsink improves the cooling of the magnet structure, which reduce power compression. 10NMB500 is suitable for application as LF driver in compact 2- way PA boxes with 1” HF driver.

SPECIFICATIONS

Nominal Diameter
Impedance
Minimum Impedance
Power Capacity ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V. C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density

10"/262 inch/mm
8 Ohm
5.89 Ohm
500 W
1000 W
(200-2000 Hz) 96.5 dB/W/m
65 - 3000 Hz
77 mm
Aluminium
Glassfiber
20 mm
7 mm
Paper
Die cast aluminium
Neodymium
1.2 T

THIELE-SMALL PARAMETERS

Qms

Qes

Qts

Vas

Mms

Xmax*

Cms

Le at 1kHz

EBP

68.21 Hz

11.8

0.423

0.408

18.63 Litres

41.92 grams

4.99 Ohms

317.3 cm2

±8.25 mm

0.13 mm/N

14.56 T.m

0.394 mH
161

1. 2 hours test made with continuous pink noise signal with Crest factor 6 dB, within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Program power is defined as 3db greater than Power Capacity.

* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

MOUNTING INFORMATION

Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight

263 mm
225 mm
8 with dia. 7 mm
244 mm
147.8 mm
4.25 kg

RECONE KIT:
RK10NMB500 - Part No: R1110N0108